Over the recent years, the global market for industrial valves had grown exponentially. Many different manufacturers appeared. But too many options can be an inconvenience if you want to find the best options. It is much better to have a few top options from which you can choose. And this is exactly the goal of this article. You will find all the basic information you need to properly do your research and make the right decision. In this article, you will find all the top valve manufacturers in China.
They are organized based on the type of valves that are available on the market. And there are over 20 different valves in the list with 4 of the top companies that are market leaders for each one of them. So, you can easily check the ones based on the needs of your systems. You can also bookmark this article, and whenever you need information about the top choices, you can simply check it.
- Gate Valve Manufacturers in China
- Ball Valve Manufacturers in China
- Butterfly Valve Manufacturers in China
- Check Valve Manufacturers in China / Non-Return Valve Manufacturers in China
- Globe Valve Manufacturers in China
- Diaphragm Valve Manufacturers in China
- Plug Valve Manufacturers in China
- Needle Valve Manufacturers in China
- Pinch Valve Manufacturers in China
- Angle Valve Manufacturers in China
- Strainer Manufacturers in China / Filter Manufacturers in China
- Control Valve Manufacturers in China
- Manual Valve Manufacturers in China
- Solenoid Valve Manufacturers in China
- Pneumatic Valve Manufacturers in China
- Electric Valve Manufacturers in China / Motorized Valve Manufacturers in China
- Shut-Off Valve Manufacturers in China / Stop Valve Manufacturers in China / Isolation Valve Manufacturers in China
- Pressure Reducing Valve Manufacturers in China / Pressure Relief Valve Manufacturers in China
- Safety Valve Manufacturers in China
- Sanitary Valve Manufacturers in China
- Water Valve Manufacturers in China / Sluice Valve Manufacturers in China
- Cryogenic Valve Manufacturers in China
1. Gate Valve Manufacturers in China
A very common type of valve that has many uses systems from multiple industries is the gate valve. Due to its multitude of uses, it is almost certain that you will need this type of valve regardless of the systems that you want to create. There 4 different companies below, and each one of them is at the apex of the industry. You can be sure that the quality of the gate valves they produce is top-notch. So, below you will find some basic information about the companies and their gate valves. All you need to do is check them and choose the ones that fit your systems’ requirements the best.
- Suzhou Neway Valve Co., Ltd.
Neway is a relatively new company compared with the old corporation in the industry. It was opened in 1997, and it only has a little over 20 years of experience in the industry. But this didn’t stop this company to reach the top of the industry as one of the best valve manufacturers in China. The range of gate valves this company can produce is quite diverse. The sizes of their valves are between DN50 and DN 1650, with the pressure ratings being between PN16 and PN420. They can make your valves from several different materials such as Carbon, stainless, alloy, and even duplex stainless steel. They can also customize the end connection in 3 different ways: RF, BW, RTJ. And lastly, the operation of the valves can be made in 4 different ways (Manual, Pneumatic, Electric, Hydraulic). - Boteli Valve Group
Boteli was started in 1998 as a local valve manufacturer in China. Nowadays, the company supplies valves in over 30 countries for several industries. The products it produces can be used in the oil and gas industries for refining and petrochemical processes, as well as in power, paper, and even LNG and cryogenics industries. The gate valves that you can order from this company have dimensions from ½” to 88” and ratings from ANSI 150 to 4500. Also, there are 4 main types of gate valves that you can find easily on the company’s website. They are the API 600, API 602, API 6D, and the expanding gate laves. So, you can simply choose the one your systems need. - Lanzhou High-Pressure Valve Co., Ltd
This is another global level company that can supply different types of valves all over the world. Founded in 2003, it had grown very fast and nowadays can produce and sell around $10 million worth of valves every year. The range of products this company can produce is extremely vast. As for gate valves, you can find all the dimensions, industries, and even materials that can be used on the website. Due to the high number of available choices, you need to visit the website and check if the company can produce the valves, you need based on the requirements of your systems. - EG Valves Manufacturing Co., Ltd.
EG Valves was founded in the year 2000, and it became a global valves manufacturer and supplier very fast. Due to its innovative business model, the company can serve a very diversified range of clients So, the chances are that you will be able to easily find the valves you may need on this company’s website. All the valves of this company are manufactured according to ANSI, API, DIN, BS, and JIS standards. And EG Valves has all the documentation which can prove its existence in the global market. EG valves focus on 7 main types of gate valves that you can check on their product pages. Each type of gate valve can have a great many options. All you need to do is give them the detailed requirements of your system and inquiry about the products you may need from this high-quality manufacturer from China.
2. Ball Valve Manufacturers in China
The ball valves are used as shut-off means for different types of systems in several industries. They are not the only options but are a very popular alternative. Similar to the gate valves, many different models can be found on the market. And because of the high level of diversity of the valves, it is impossible to find a company that manufacturers all the possible types of products. So, below, you can check the top 4 companies that produce this type of valve.
- Zhejiang Valogin Technology Co., LTD.
Valogin is a slightly older company, being started in 1985. The number of types of ball valves that this company produces is very high. But luckily, you can use the search system on the company’s website to find the exact valves you need based on the requirements of your systems. For ball valves, there are tens of different models that you can check one by one. But instead of wasting your time, it would be a better solution to find the requirements of your systems and use them to search the valves you need more efficiently.
- Watts Valve (Ningbo) Co., Ltd.
The watts corporation is a very old entity on the market. It started at the beginning of the last century and continues to thrive even today. And this proves the ability of the company to produce and sell high-quality products that satisfy the needs of their clients. It didn’t start as a Chinese company, but nowadays it has factories and subsidiaries in several countries including China. There are 40 different models of ball valves that the company can create. And they can also have different sizes, materials, and even connections.
- EG Valves Manufacturing Co., Ltd.
Yes, EG Valves appears again on the list. This company also supply several types of ball valves, and most of them are of the world’s advanced quality. So, it should not be a surprise that it can appear in this article for several types of valves. This situation will repeat for some other companies. You can learn more from their complete guide to ball valves. Each type of ball valve can be customized based on different clients’ project requirements. - Jiangsu YDF Valve Co., Ltd.
Started in 1978, Jiangsu YDF has over 40 years of experience in the industry. Nowadays, it has several factories in China, covering the country as well as 6 branches in several other countries all over the world. The company focuses on producing heavy industrial valves. The number of products it can produce is slightly more limited, but its quality is top-notch. And all you need to do is check the company’s website to easily find if any of their products fit the needs of your projects.
3. Butterfly Valve Manufacturers in China
The butterfly valve is another type of product that is mainly used to shut off flow in control and management systems. By now, you should know that you have multiple options for this purpose. And you should choose the type of valve based on the specific requirements of your systems. And although they can manage the flow as well, it is not recommended to use this type of valve for that purpose. The top companies in China that produce this valve are:
- Suzhou Neway Valve Co., Ltd.
This is another company that can reach the top for multiple types of valves. You need to remember that China is a very large country with a massive population. The number of manufacturers in the country can rival the rest of the world. So, it is a big achievement for a company to reach the top for more than a single type of valve. And Neway has 3 types of butterfly valves that are top-notch and worth considering. You can easily check them on the company’s website - Jiangnan Valve Co., Ltd.
With over 27 years of experience in the field, this is another company that entered the global market and reached the top. It designs, researches, and creates its valves based on the needs of its clients. It produces several types of butterfly valves that can be customized based on your needs. With a high degree of diversification, it is recommended that you check the products sold by this company before you make any decision. - WuZhou Valve Co., Ltd.
From 1978, this company continued to grow and expand. With top-quality products and very good customer service, it was able to reach the top of the industry. Now it is one of the market leaders, and the popularity of their butterfly valves is especially great. You can find 3 basic models of butterfly valves on the company’s website. And each type has different levels of customization that you need to check to ensure that the company has the exact valves your system requires. - Chaoda Valves Group Co., Ltd.
The company started in 1984 under the name of Yongjia Qingshui Gauge Valve company. But over the years, due to its continuous growth and development, it changed and improved itself, including its name. The company produces many different types of valves. Although it specializes in only several types of butterfly valves, it is also one of the best manufacturers of the butterfly valves in China. You can find their butterfly valve for medium and high-pressure systems as well as for cryogenic systems.
4. Check Valve Manufacturers in China / Non-Return Valve Manufacturers in China
Check Valve is also called Non-Return Valve. The check valve has an essential purpose in many different systems. It can stop the flow of the system from going backward when the flow is stopped, or something causes it to act that way. The quality of the check valve is very important. You need to pay extra attention while you choose any type of check valve, both now and in the future. In this article, we would like to introduce several top check valve manufacturers in China as below:
- Xinhai Valve Co., Ltd.
Xinhai was established in 1986, and it has had the API certification for over 15 years. And that was enough time for the company to improve itself and grow to reach the global level in the industry. It ensures the quality of its products. So, the quality of the check valves is top-notch and ready to cover the needs of your systems. It provides different types of check valves designed for multiple industries and systems. So, the chances are very high that you will find exactly what you want from this company. - Jonloo Machine Manufacturing co., Ltd.
This company was started in 2000 as a subsidiary of a bigger corporation. Over the years it proved to be a very good decision made by its parent company as it was able to reach the top of the industry. It provides 38 different check valves that you need to check. The high variety of products does not restrict the quality of the company’s products. And the chances are quite high that you will find the valves you need. - KOJO Valve Co., Ltd.
Since 1997 KOJO has grown as one of the market leaders in the industrial steel valves sector of the industry. It has only 4 different models of check valves. But each one of them can be customized for your needs. On their website, you can find all the possibilities of the company to modify the valves. If the capabilities of the company fit your needs, then all you need to do is to choose the model you need and compare it with the other options provided by the top companies on this list.
- Zhejiang Guanlong Machinery Valve Co., Ltd.
Founded in 1985, this company expanded greatly over the years. It is not only able to produce the valves you need, but it can also install them. They also have a sales system in place. So, the company can cover all your needs at the same time. The variety of the products provided by the company is also great. You can find 156 different models of check valves. So, there is surely one that will cover all the requirements of your systems.
5. Globe Valve Manufacturers in China
Although the name is similar to a ball valve, the globe valve is very different. Firstly, the purpose of this type of valve is very different. It is used to regulate the flow of the system. Although it can also be used to shut the flow off, the main use is its regulation ability. So, you can take your time to check the option provided by the top companies below, compare the products you need, and choose the best one for your needs.
- Zhejiang Newton Fluid Control Co., Ltd.
A comparatively new company that was made in 2006, Zhejiang Newton was able to reach the top of the market using the top quality of their products. And although all the products have a comparatively high quality, the globe valves are at the top of the industry. They provide 9 different types of globe valves. And each one of them can be customized based on the requirements of their clients. All you need to do is to check with the company if it can create a personalized valve based on the needs of your systems.
- Zhejiang Ronze Valve Co., Ltd
Ronze appeared in 2003 on the market, and over time its growth was astounding. It easily reached the top of the industry as a market leader, and it greatly increase the range of products it can produce. You can choose from over 50 different globe valves. So, it is almost sure that you will find the type of valve you need. Do not forget to compare the products you choose with those of other companies to see which one will bring you the most benefits.
- Shanxi Ancheng Zhihe Industrial Co., Ltd
From 1994 until today, this company has reached a massive scale. Being able to produce 25 different globe valves continues to improve both the quality and the diversification of their products. And this allowed them to overcome their difficulties and reach the top of the market. Their goal is to fulfill as many needs as possible that their clients’ systems may have. So, you can trust the company to have the perfect product for you.
- Shanghai Ritai Valve Group Co., Ltd.
Shanghai Ritai is a new age company, started in this century, in 2001, the company offers 10 types of globe valves. For each type, they can provide an enormous variety of customization. Although they do not have hundreds of models, if you consider the variety of customization possible, then you can be sure that it won’t lack behind its competitors. But you will need to check if their globe valves can be customized based on your system’s requirements.
6. Diaphragm Valve Manufacturers in China
The diaphragm valve is another type of flow control product. But it can be used for bi-directional flow systems. It regulates the area available for the liquid to flow. It is mainly used in systems that have low pressure. So, if your systems need this type of valve, then you can check the products made by the top manufacturers below and choose the one that will fit your needs the best while also having the best price.
- Tianjin Kxc Metal Products Co., Ltd.
From 2004, the year of establishment, the quality and range of products provided by Kxc have increased greatly. Nowadays, they are even able to produce relatively rarer valves such as the diaphragm valve. They have 4 different types of such valves, which is enough for this type of specialized valve. And each of the types can be easily customized based on the standards and requirements of your systems. So, you should check the possibilities, and you may even want to contact the company and see if they have the valve that will fit your systems the best. - Zhengzhou Gaoshan Valve Co., Ltd
Established in 1975, this company is one of the first ones to obtain a permit in the Chinese valve manufacturing industry. As one of the companies with the longest history, it didn’t disappoint becoming one of the top leaders of the industry. As for the diaphragm valves, the company can produce 7 different types and each one of them can be customized for an extremely large number of different system requirements. - Vatac Valves Corporation
From 1989 this corporation entered the valve maneuvering market and in approximately 2 years it was able to expand enough to enter even the international market. It is a great company with incredible insight and capabilities in this field. It also provides tens of different types of valves. And the diaphragm valves are some of the bests on the global market. In total, it can produce 47 different such valves, including the customization ability of the company. - Laizhou Dongsheng Valve Co., Ltd.
Another one of the companies started in this century, established in 2002, focused mainly on ensuring top-notch quality and a large diversity of products. Which proved to be a great decision as it brought it the position of a market leader. You can find 36 different models of diaphragm valves produced by this company. And if you contact the company, you may even be able to customize them to a certain extent. Keep in mind that the diaphragm valves produced by this company enjoy a good reputation in China market.
7. Plug Valve Manufacturers in China
The plug valve has a similar usage to that of the ball valve. The main difference being the method used to close off the flow in the systems. Instead of a ball, it uses a cone model. Moreover, the method used is better for fulfilling this task because of the difference in the mechanism used. So, if the importance of closing the flow in your systems is essential, then it may be a better idea to use this type of valve instead of the ball alternative.
- Zhejiang Zhedong Valve Corp., Ltd.
This is a company that started big with over 100 million yuan invested in 2 production bases in the year 1985. Its success proving that the confidence of the founders was not empty. Over the years, it also reached and kept its position as a market leader. Also, the plug valves produced by this company are recognized as some of the best available on the market. They provide 8 different models of such valves, and they can be greatly customized. - EG Valves Manufacturing Co., Ltd.
EG valves also supply many kinds of plug valves to overseas markets since 2004. Their plug valves also enjoy a good reputation in 33 countries. Like other valves they offer, their plug valve can be customized according to clients’ requirements with fine quality and affordable prices. If you have any demand for the plug valve, it is recommended to contact EG Valves directly and ask for details and make sure if they can meet your requirements beforehand. - Kaitai Valve (Group) Co., Ltd.
From the time of its establishment in 1998, Kaitai had continuous growth. Even now, the company plans to continue its expansion as it looks for new locations. And with 79 different plug valve models, the company provides a high variety of valves that you can check and find the ones your systems need. Make sure you properly make all the necessary comparisons before choosing the manufacturer and valves you buy. - Zhejiang Naibang Valve Co., Ltd.
As one of the newest market leaders in the valve manufacturing industry, this company proved that it is still possible to reach the top at any time if your company is good enough. Although it started exporting only in 2015, and it only provides 2 types of plug valves. The degree of customization and the quality of the products will ensure that you will be fully satisfied with their products. You only need to make sure that your systems require the types of valves they can produce.
8. Needle Valve Manufacturers in China
This type of valve is mainly used to control the flow in a system. What differentiates this type of valve from the others is the precise control it provides over the flow. But at the same time, it is only effective in systems where the flow rate is slow. It is a specialized valve that is used in only specific systems and has critical requirements for usage. It is also much less used compared with other flow control valves. But it is mandatory in several types of systems.
- Zhejiang Fangdun Instrument Valve Co., Ltd.
Started in 2002, the company production rate had reached enormous peaks over the years. It can produce millions of valves each year. As their best seller, the needle valve reached a production of over 2 million. It also has a high diversity of such valves that you can easily check and see which one is the most suited for your needs. Of course, you need to make sure that the requirements of your systems are met, and you should also compare the available options of all 4 companies on the list. - Wenzhou Huiyi Valve and Fittings Co., Ltd.
With 118 different models of needle valves, this company provides all the options that most current systems could require. You only need to find the ones that fit your systems the best and compare them with the others. As one of the new market leaders in this industry, this company has one special advantage. It is located near an airport which provides it the ability to provide very convenient deliveries. - Nantong Roke Fluid Equipment Co., Ltd.
Started in 2008 and able to enter the international market in 2013, this company has an incredible growth rate. One of the main reasons for its success is the customer-focused approach which attracted many long-term customers. As a result, the growth of the company was exponential over the years. Now, you can choose from 69 different needle valve models. And if you find the product you need, and you want a long-term collaboration, then this company is one that you should strongly consider. - Yadeng Valve and Fittings Co., Ltd.
From 2004, the company had a stable growth. Although it was not explosive nor exponential, the stable growth shows a long-term approach of the company. Looking for decades or even centuries of success. And the quality of their products empathizes with their goals even more. As a result, you can be sure that the 10+ types of customizable needle valves will fully satisfy the needs of all the systems that need them.
9. Pinch Valve Manufacturers in China
This is a multifunctional type of valve. It can be used to control the flow of the fluid in the system. But you can also use it to completely stop the flow as well. It works similar to a tap, and it is a very economically advantageous valve. It uses a rubber lining to ensure the quality and long-term usage of the valve. If you need this type of product, then below you will find the top options that can be found on the market.
- Lianke Valve Co., Ltd
The company started in 1982 under another name, and its purpose was for other industries. But with its growth and the right pivoting in 2002, the company switched industries and successfully became one of the market leaders in valve manufacturing. It is currently able to produce 23 types of pneumatic pinch valves, as well as 7 different types of electric ones. The quality of all the options it provides is great and you may not be able to find any other better option. - Ningbo Jianai Pinch Valve Co., Ltd
As one of the newest companies in the valve manufacturing industry, the method used to become a market leader is simple but very ingenuous. The company focused on a single type of valve and became one of the best companies producing it. As a result, you can find almost any kind of pinch valves produced by this company. It is strongly recommended to check this company and all the possibilities it provides. - Autorun Control Valve Co., Ltd.
The company started to gain weight in the industry in 2013 when it was able to enter the international market. From then on, it steadily raised to become a market leader, and it now produces some of the best pinch valves on the market. You will be able to find 23 different models if you check the products made by this company. So, make sure to research the company and its potential of becoming a long-term partner for your business. - Wuhu Naide Rubber Hose Valve Co., Ltd
This is one of the special companies that you will find on this list. Unlike most other corporations, Naide Rubber Hose focused its efforts on producing mostly rubber-lined valves. As a result, the pinch valves the company makes are at the top of the market. Being focused on this aspect is very rare. So, the quality of the valves that use this type of inclining is top-grade. And you can also check the other types of valves, produced by the company, that come with rubber lining.
10. Angle Valve Manufacturers in China
The angle valve is another option that can be used for flow control. What makes this valve special is its ability to control the pressure inside the systems. If the pressure is too high, then the valve will open and let the fluid flow, and if the pressure is not enough, then the flow will be more restricted. Although it is not as common as other valves. It is very useful in boiler systems and other alternatives that require pressure management in the system.
- Zhejiang Valogin Technology Co., LTD.
Valogin was created in 1985 and developed over the years. Its success was steady, and it slowly but surely reached the position of a market leader. The company focuses on creating valves made from brass, and they offer 68 different models for angle valves. A great diversity that has the goal to find as many clients and satisfy their needs perfectly. The chances are very high that you will be able to find the type of valve you need on its website. - Daisen New Materials Technology (Jiangsu) Co., Ltd
Starting as a manufacturing factory in 2008, the company has fast growth, probably because it entered the international market very fast, in the same year, and focused on the quality of their products. It also provides a large variety of products. You should check all the products that you may need now or in the future. And angle vales alone have many customization options. The company being able to produce hundreds of different models - YD Valve Co., Ltd.
This is another company that started as a specialized manufacturer. From 1999 the company started to produce angle valves. And after it became a market leader, it slowly expanded to be able to produce other types as well. There are more than 10 types of angle valves that can be found on the company’s website, and each one of them can be customized to fit the needs of most systems used in the world. It is worth your time to check the potential of this company. - Ningbo Acro Fluid Control Co., Ltd
With over 20 years in the field, this company has both the experience and dedication needed to become a market leader. Besides the top-quality products, you can see the customer-focused approach by the communication options available. You can easily contact the company even by using Skype and WhatsApp. So, you will be able to ask any question you may have about the 27 angle valve models on their website.
11. Strainer Manufacturers in China / Filter Manufacturers in China
Strainers including Y type Strainer, T type Strainer, and Basket Strainer. Meanwhile, Strainer is also called Filter by some clients. Although they are not called one type of valve, they are very essential in many different industrial systems. The goal of the strainers/filters is to stop the substances that are not desired to flow in the system. Below you can find the top companies that can produce the best quality strainers, as well as those that have the largest variety of strainers and filters.
- Shanxi Solid Industrial Co., Ltd.
From 2006 when the company was established it was able to not only grow itself until it reached the peak of the market. But it also expanded the range of products it can create great. Even for the strainers and filters, you will be able to find more than 50 different options. Although the usage of these types of products is limited to specific industries and systems, this company paid close attention to them. And the quality of their products is surely top-notch. - Wenzhou Ruixin Valve Co., Ltd.
A relatively new company, being established recently in 2010, Ruixin is a valve manufacturer that produced most of the common types of valves that can be found on the market. But it also focuses on producing 5 types of Y strainers that can be customized based on the different standards and systems on the market. Being on this list, you can be sure that there are no better options than those of this company. - Tengs Valve International Limited.
Tengs is one of the most known valve manufacturers in the gas, petroleum, and chemical industries. But they also produce top-quality valves for the power and water treatment industries. As you can imagine, the strainers and filters needed in these fields are essential. So, the company produces several types of such products, including the Y, T, and basket strainer. All of which can be easily customized in many different ways. - Zhejiang Petrochemical Valve Co., Ltd.
An older and well-established company started in 1978. It is one of the market leaders in the industry, especially in the manufacturing of strainers. It is even supported by the nation. So, you can be sure that the 2 types of strainers, the Y and T series, have both top quality as well as a high degree of customization following the most used standards in the world. The strainers provided by this company are at least equal to those of the above 3 companies.
12. Control Valve Manufacturers in China
As the name implies, this type of valve is solely focused on the control over the flow of the systems. It allows you to easily control not only the flow in the system, but also the pressure, temperature, and liquid level of the system. In most cases, it is an automated type of valve. But there are also possibilities to make it manual. The companies below, are all market leaders that invested heavily in the technology required to produce these types of complicated valves.
- Shanghai Thinktank Process Management Co., Ltd.
As a branch of the Taiwan Stone Valve Group that was opened in 2012, it became a sensation of the industry in recent years. How so? Well, it reached the top of the market for its control valves and several other valves in a very short period. The company can produce over 100 different control valves that can be used for many different systems and situations. It fully proved its capabilities, and it fully deserves to be on this list. - Zhejiang Huizheng Auto Control Valve Group Co., Ltd.
This company started in 2009 as a specialized valve manufacturer. The main types of products are auto control valves. And although they can produce other types as well. The company focuses on the control valves. Most of their products are related to this, and the effect s revisable. The quality of the control valves is top-notch. And you can find over 480 different models of such valves produced by this company. - COVNA Industry Automation Co., Ltd.
Although it was established quite recently in 2013, COVNA focused on innovation. As a result, it was able to become a leader in this field on a global level and a market leader in the production of control valves and several other types. With so little experience to reach this level proves the capabilities of this company. Similar to the other companies renowned for their control valves, COVNA produces over 100 different models of such products. - Wuxi Xinyi Automatic Machinery Factory.
With over 240 different models of control valves, this company proves its ability to satisfy the needs of its clients, regardless of the requirements they may have. It was opened in 2005 and had steady growth over the years. In 2013 it managed to enter the international market and easily reached the top of the market in this niche. Now, the control valves manufactured by this company can be compared with the best ones available all over the world.
13. Manual Valve Manufacturers in China
You need to understand that the available valves on the market can be categorized in different ways. And in this case, the manual valves can be of different types, as long as they are operated manually. Below, you will find the top companies that focus most of their resources to produce most of the types of manual valves that you may need. Keep in mind that you may not be able to find better options than those. So, you may as well start your deeper research using the companies in this list.
- EG Valves Manufacturing Co., Ltd.
Most of the valves produced by EG valves are manually operated. That is why EG Valves appears on this list repeatedly, the quality of the manual valves it produces is guaranteed on the Chinese market. A very steady company that focuses not only on quality but also on the customer service it provides. If you need some kinds of manual valves, you can contact EG Valves directly to get their assistance. Meanwhile, you could also check the 3 other options and make an educated decision afterward.
- Ninbo SIO Fluid Equipment Co., Ltd.
SIO has taken its first custom task in 2009, and it produced spectacular results. Over the years it continued to replicate the top-quality results. And established itself as one of the market leaders in the valve manufacturing industry. They produce a large number of manual valves and automated ones as well. It is recommended that you visit the company’s website and check all the available options and choose the best ones for your systems. - Weidouli Valves Co., Ltd.
With 9 types of manual valves and many different types for each option, this company provides a great variety of products that you may need for your systems. With many years of experience since its establishment in 1989, you can be sure that the products made by this company can satisfy all the needs and requirements of their clients. As one of the top 4 companies that manufacture manual valves, you will surely not be disappointed. - Beijing Valve General Factory Co., Ltd.
As an old company that was started in 1952, it maintained its place in the industry and remains at the top even now. Proving its capabilities year after year, you can be sure that choosing the products of this company is never the wrong move. And if you compare the manual valves it produces with the ones of other companies on the list, you will be able to see the same level of impressiveness. And you will also have the chance to find the best possible option for your needs.
14. Solenoid Valve Manufacturers in China
This type of valve is another specialized valve that has several specific usages. Although it can be used to stop the flow of the fluid in the system, its main purpose is to combine different elements and realize a specific control in the system. It is very common in systems used for research purposes as well as a few industrial systems. And below, you will find the companies that have the best solenoid valves in China.
- Yuyao Sanlixin Solenoid Valves Co., Ltd
From the year 2009, this company made a big impact on the solenoid valve manufacturing market. It reached the top very fast and continues to dominate its competition. The main reason for its success was the specialization of the company and the focus of their resources to make the core products the best ones. It provides over 100 different models for this type of valve. And you can easily find the ones that will help you fulfill the task of your systems. - Ningbo Regis Solenoid Valve Manufacturing Co., Ltd.
Opened in 1999, the company started with a dream of becoming the best pneumatic valve manufacturer in the world. And although it wasn’t able to fulfill its dream yet, it still became a market leader in this industry. With continuous growth and development, the company is on its way to fulfill its goals. And the 320+ model of solenoid valves, which you can check, proves the commitment of the company to its goals. - Yuyao Yongchuang Solenoid Valve Co., Ltd.
From 1998, the company entered the market as a specialized company in this field. It recommends itself as a technology company focused on the design, research, and development of solenoid valves. But it is also one of the market leaders for this type of valve. Although it only has 4 types presented on its website, the company can customize any of the models. And you may even be able to order fully custom valves. So, you should surely contact the company during your research process. - Yuyao No.4 Instrument Factory
The top of the solenoid valve manufacturing market is reserved for this company. From 1965, so, for more than 50 years, this company focused solely on the production and development of this type of valve. It remains one of the pioneers in the field, and you can be sure that all the solenoid valves it produces are the best. Also, the great diversity of models will ensure that you will always find the model you need from this company.
15. Pneumatic Valve Manufacturers in China
This is a control valve. And, as the name implies, it is used in pneumatic systems. For the large majority of such systems, the usage of this type of valve is mandatory. As a result, this type of valve can be considered a common one nowadays. But that does not mean that all the options you can find on the market are good enough. It is essential to do proper research and choose a top-quality valve, such as those produced by the companies below.
- Yueqing Right Pneumatic Co., Ltd.
From 2003, this company developed and expanded itself in the pneumatic system industry. Although it is not focused solely on making valves, that does not mean the valves it makes are not top-notch. On the contrary, because the company focuses itself on all pneumatic systems, the valves it can produce are some of the best that you can find on the market. Equal to the other 3 companies on the list, it has the best products available anywhere in China. - Wenzhou Kagsun Intelligent Tech. Co., Ltd.
One of the newest companies in the industry, Kagsun Intelligent tech was established in 2017. And recently, the company entered the international market and took it by storm. Although it is another company that focuses more on pneumatic systems, the main focus is the pneumatic valves. With hundreds of products that can be used in this type of system, it is one of the companies you must check.
- Zhitai Technology Group Co., Ltd.
This corporation is a valve-focused manufacturer that was created in 2003. Unlike the first 2 companies on this list, it can produce many different types of valves, not only pneumatic ones. But the quality of their products is so good that they were still able to secure a place on this list. With over 200 pneumatic valves, you will surely be able to find the ones needed by your systems. And you can be sure that you only get the best options for your systems.
- Wuxi Xinming Auto-Control Valves Industry Co., Ltd.
This is a very specialized company. Not only it focuses solely on manufacturing valves. But it is also niched on the pneumatic ones. As a result, all the products of this company are points of interest for you. With over 190 pneumatic valves, it is another great company that will offer you the valves you need. In the end, you need to compare all the best options and choose the ones that fit your need the most.
16. Electric Valve Manufacturers in China / Motorized Valve Manufacturers in China
Similar to the manual and pneumatic ones, there are several different types of electric valves. They are great tools that can automate parts of your systems, increasing their efficiency and productivity. Nowadays, they are mandatory parts of many different systems from many industries. And below, you will find the top companies that are world renewed to produce the best products in this niche. If you need this type of valve, then they are the best options you will find.
- Taizhou Tonhe Flow Control Co., Ltd.
Starting strong from its establishment in 2009, this company continued to expand the products it can create and ensure that the quality of its products is always top-notch. It always had steady growth. And, as a result, they are now able to produce over a thousand different models of motorized and electric valves. It may seem that the number is too high. But if you know exactly the type of valve you need, then you can easily search and find the best valves for your system.
- Wuhan Grat Control Valve Co., Ltd.
The Grat company entered the international market in 2016. And in only 5 years, it was able to reach the top of the electric valve manufacturing market. One of the reasons is their focus on only 4 types of electric valves. And although for each type, they provide a great number of models and customization, the focused approach helped the company to produce the top results that made it a market leader and offer you the best options that you will ever find. - Tianjin Bell Automatic Instrument Technology Co., Ltd
As the name implies, this company is not only a valve manufacturer. It also manufacturer other automatic products. But the quality of their electric valves is so good that it was not possible to avoid introducing them on this list. In the end, the company produces over 200 different electric valves which is an enormous number for a business that is not fully focused on manufacturing valves. The results it got over the years also prove that using the valves of this company is almost always a good idea.
- Wenzhou COVNA Valve Co., Ltd
Established in 2000, this company is focused on valve manufacturing. And its 2 main types of products are pneumatic and electric products. But it is more renowned for its electric and motorized valves. With over 100 motorized valves, the company boasts a great diversity which allows them to cover the needs of their clients. Although it has a similar name with another company on the list, the 2 are different companies.
17. Shut-Off Valve Manufacturers in China / Stop Valve Manufacturers in China / Isolation Valve Manufacturers in China
Another category of valves that you may be looking for is shut-off valves. You can find several different types of valves in this category. Some of them can be found in this article already, while others are not. Anyway, the choices you will make must be based on the needs of your systems. Also, the companies you will find below are those renowned for producing several types of such valves of top-notch quality. So, it is mandatory to check them if you need valves for this purpose.
- Yuanda Valve-Yuanda Valve Group Co., Ltd.
When you visit this company’s website, you will find out that all its products are categorized based on the standards it uses. But with a little search, you will find out that all the shut-off valves that can be found are the best possible ones. From 1994, the year of its establishment, this company always maintained top quality for their products, including the shut-off valves. As a result, it got a place on this list and ensure that there are no other such valves better than the one it manufactures. - SUFA Technology Industry Co., Ltd.
From 1997 this company focused on everything related to valve manufacturing. The employees of the company design, research, manufacture, and even take care of the sales of the values of the company. The stop valves produced by this company have a large range of specifications that can be customized greatly. It ensures that you will be able to find the perfect valve for your system. - Suzhou Sip Stard Valve Co., Ltd.
Stard is another company established in this century, more precisely in the year 2003. Like many of the other companies on this list, it was able to distinguish itself and become one of the market leaders for the shut-off valves they produce. You will be able to find several different types of isolation valves produced by this company. And all of them have top quality and competitive prices. - Lanzhou High-Pressure Valve Co., Ltd.
This company is not only one of the market leaders for valve manufacturing. But it is also one of the innovation leaders in the field. And this combination allows it to maintain its top position in the field. The company can produce all the types of shut-off valves that can be found currently on the market. So, you will surely be able to find the exact valve that will cover the needs of your systems.
18. Pressure Reducing Valve Manufacturers in China / Pressure Relief Valve Manufacturers in China
The Pressure Reducing Valves have an essential role in the systems that deal with downstream flows. This type of valve can regulate the pressure of the flow to provide better control over the system. There are small differences between the types of such valves that you may find on the market. But the basic principles are the same. So, by checking the companies below and their products, you will surely find the type of valves you need.
- BCST Group Co., Ltd.
BCST group has over 20 years in the industry. And it is one of the companies that had a very rapid development. They became a market leader very fast and can produce many top-quality valves. The 4 types of Pressure Relief Valves they produce can be easily customized based on the needs of your systems. So, you should check their products and contact the company to make sure that can make exactly what you need. - Shanghai Shinjo Pump & Valve Co., Ltd.
A company that specialized in manufacturing industrial valves and that has many different types of products available. Especially the Pressure Reducing Valves of the company are some of the bests in the world. So, you must check the 13 types as well as the customization possibilities of the company. Although the diversity may seem small, it is entirely possible to customize these types based on your requirements.
- Xiamen Kemus Valve Co., Ltd.
With 34 types of Pressure Relief Valves, all of which can be customized for your needs, it is almost guaranteed that you will be able to find the perfect valve for this purpose. Moreover, this is a company with a steady rise and continues even now. Although the rise of the company was not fast, it was constant. And that may be the perfect advantage you want from a long-term partner. So, you should research this company carefully.
- Cixi Fly Pipe Equipment Co., Ltd.
Cixi Fly Pipe Equipment is one of the new companies in the industry. But it is an amazing one that had a massive growth which allowed it to reach the top of the market in a relatively small period. The PRV valves it provides are at the top of the market together with the other options available from the other top companies. It has 26 such valves that you can check at any time and find the ones that fit your requirements the best.
19. Safety Valve Manufacturers in China
As the name implies, the purpose of this type of valve is to ensure the safety of the system. They work as a fail-safe mechanism that activates when something does not work properly. It can also be used to prevent damage from accumulating in the system. For this reason, it is an essential part of an extremely large number of systems. It is almost sure that your systems will also need this type of valve. So, make sure to properly check the options available from the top manufacturers mentioned below.
- Newton Fluid Technology Co., Ltd.
Yet again on our list, this company does not only produce top-quality globe valves but also safety valves. As for the companies introduced here, you can be sure that they are good choices in the Chinese market. So, you can check the 15 types of such valves with ease of mind. All you need to make sure is that the company produces the type of valves you need and that the price of the products is acceptable for you. - Shenzhen AETVC Valve Co., Ltd.
AETVC was established in 2010, and it has a reasonable amount of experience in manufacturing many different types of valves. Understanding the importance of the safety valves in a system, AETVC company pays attention to the quality of the safety valves. Although the quality of the other products does not fall behind, the company is renowned for the quality of its safety valves. They supply 20 types of safety valves in this category for your selection. If one of them fits your needs, then you can contact their sales team to see if their price can be acceptable or not. - Zhejiang Haiyi Valve Co., Ltd.
The company was established in 1991 and had continuous growth over the years. Currently, it specialized in producing safety valves. But it can also produce some other types of valves. As a result, it has over 53 types of safety valves from which you can choose. An enormous number of these types of valves showcasing the specialization of the company and emphasizing the importance placed on this type of product.| - Yongjia Goole Valve Co., Ltd.
This company is not only specialized in manufacturing valves. It also provides services in the same industry. So, if you need more than the valves produced by a company, then this may be the choice you want to know more about. With over 82 different safety valves, you can be sure that the company will be able to not only provide you with the exact type of valve your system needs but can also help you fully build it.
20. Sanitary Valve Manufacturers in China
The name provides a lot of insight into this type of valve. You need to know that sanitary valves are used in industries such as food processing, drinking water supplies, and pharmaceutical systems. Generally speaking, any system that can affect the health of the people should use sanitary valves. For this reason, for valves to be considered sanitary, they must follow higher stricter standards compared to general valves. And the companies below are some of the top sanitary valve manufacturers in China.
- Wenzhou J&O Fluid Control Co., Ltd.
This company is the perfect example of a company that understands the importance of their products and the responsibility they have. Although all the companies in this article are top-notch, the responsibility of a company that manufactures this sanitary valve is much higher. Moreover, this company makes many different sanitary valves. So, you can find everything you will need for your systems
- Wenzhou Longva Light Industrial Machinery Co., Ltd.
An older company in this niche, Longva entered the international market in 2010. Keep in mind that most of its products are sanitary valves and related products. So, the difficulty in manufacturing is much larger. And yet, the company was able to succeed and produce top-quality products even in a high-difficulty niche such as this. Overall, the company has over 600 products that are used in industries requiring fully sanitary systems. - Wenzhou Nuomeng Technology Co., Ltd.
This is another company that fully specializes in sanitary equipment. Although it is not fully focused on valves, and it makes other sanitary products as well, the quality of the valves is still at the top of the market. If you visit the company’s website you can easily find all the basic types of valves that you may need in this type of system. And you can be sure that there are no other better options, only those equal to it.
- Qili Fluid Equipment Co., Ltd.
A company that was established in 2006 by Mr. Zhu a professional in the field for 8 years before he started his own company. To reach the top of this niche is not easy. But the story of Mr. Zhu reveals that enjoying your job and striving to be the best will always bring both satisfaction and results even in the hardest sectors of the market. This is a trustworthy company that can provide you with all the sanitary valves that your systems may ever need.
21. Water Valve Manufacturers in China / Sluice Valve Manufacturers in China
This type of valve is a specialized kind of product used in the water industry. Although it can be used in other industries as well, it is very rarely seen. It is a type of gate valve, but due to its specialization, it is treated separately. If you need this type of gate, then it is recommended to check and choose the ones produced by the companies mentioned below. You can be sure that these companies produce the best possible options currently available on the market.
- Qingdao Huaguan Valves Co., Ltd.
Established in 1986, this company is one of the top valve manufacturers that also produced water or sluice valves. Compared with the other manufacture on the market, it is clear that this company deserves to be one of the market leaders in the field. On the company’s website, you can find several kinds of valves that you may be interested in. If you only need water gates, then you can take a fast look and check this type of product that the company can manufacture.| - China Bohai Valve Group Co., Ltd.
This corporation is one of the older companies in this industry. It was founded in 1980, and over the years, it expanded to become one of the market leaders in the production of water and sluice valves. Although the other types of valves the company produces are also very good. The difference between the water valves of this company and the rest is more evident. Thus, the company became the market leader for these types of valves. - Tianjin Union Valve Co., Ltd.
A new company on the market that started in 2017 and was able to become a market leader in one of the niches of the valve manufacturing industry. Keep in mind that the water valves are a specialized kind. So, the 9 types of such valves produced by the company represent a quite large diversity from which you can choose. This may be one of the reasons for which this company was able to reach such a high level. - Tianjin Worlds Valve Co., Ltd.
Started in 2007, this company has the greatest diversity of sluice valves that you will find on the market. With over 200 total models of such valves, it is impossible for you to not find the perfect valve that will fully cover the needs of your systems. Of course, the types of water valves are not that many. But together with the customization and possible variations, a market leader like this company can be able to manufacture such an impressive number of different sluice valves.
22. Cryogenic Valve Manufacturers in China
This type of valve represents a category of valves that are used in cryogenic systems. Basically, cryogenic valves are used for low temperature working conditions. Following you will find the top 4 companies that produce the best possible cryogenic valves in China. So, if you need any kind of valve for this type of system, then you must check these companies before any other one.
- Baltic Valve Co., Ltd.
With 15 years of experience in the valve manufacturing industry, this company not only provide top quality products, but also exemplary customer support. Moreover, the cryogenic valves produced by this company are easily some of the bests on the market. In total, you can find 19 types of cryogenic valves that are separated into 3 types, globe, check, and gate valves. All of them are essential parts of almost any cryogenic system.
- Kaitai Valve (Group) Co., Ltd.
Appearing again on our list, you can be sure that this company is one of the best for most of their products. And now, in this part of the article, we recommend you to check the cryogenic valves that are produced by this company. In total, there are 38 products in this category that you should take at least a look at. You will surely find most of the products you will need for your systems in the future.
- Oviko Group Co., Ltd.
Founded in 2004, this company is a great valve manufacturer that provides a very large variety of products. It only produces a single type of cryogenic valve. and it may seem hard to believe that it can appear on this list. Ut the quality of the cryogenic ball valve and the high number of customization options allow it to take a place on the list. This only shows how great and popular the single type of valve in this category is.
- Lianggong Valve Group Co., Ltd.
From 1989, the year of establishment of this company, it has continued to grow until it reached the top. It is now recognized as one of the market leaders in the industry, especially for the cryogenic valves it can produce. The capabilities of the company allow it to make 27 types of cryogenic valves from which you can choose the ones that your systems need. Make sure to compare all the options that you found with the ones manufactured by other companies.
Conclusion
You need to bookmark this page or simply save the link in a safe place. This way, whenever you may need the information in this article, you can simply come back and check it again. The good news is the fact that you will always be able to find the best possible valve that you will need in the future.
Keep in mind that most of the companies on this list are large corporations that will be in this business for a long time. So, you can use the information even after a decade. Of course, the best option that you have is to check the companies that interest you after finding them in this article. You surely need to check the valves that you need. So, at the same time, you can do a small research about the companies on the list and make sure that they are still the leaders of the industry.
